Bicester Soundproofing Products

Tel: 01993 704810

 

 

Soundblocker Membrane

 


HELP                    HOME              CONTACT US              SITE MAP              PRODUCTS

 

 

SoundBlocker Membrane

Lightweight Sound Barrier Mat 

       12m x 1.25m rolls

       1mm thick

       Easy to cut and install

       Lightweight

       Part E compliant

 

Applications

SoundBlocker Membrane is a lightweight sound barrier mat designed specifically for decoupling layers of acoustic plasterboard to improve their soundproofing properties when soundproofing ceilings.

“Very effective product, easily applied and good value for money." James Clark

 

Description

This lighter sound barrier mat incorporates up to date technology and synthetic recycled carrier layer with dense natural fillers to produce an efficient acoustic membrane that gives excellent results when used for upgrading the soundproofing of ceilings.  At nominally 1mm thick, SoundBlocker acoustic membrane will give improved noise reduction for minimum loss of room space.  Because its only 2Kg/m² it is easy to handle when cut from the roll and very flexible.  Soundproofing a ceiling is now easier as the membrane is simple to work with making for a quick, easy, DIY product.

 

 

SoundBlocker Membrane is extremely flexible and can easily be folded around corners if necessary and is similar to Sheetblok and Acoustiblok but less expensive.  Not only is this an acoustically efficient product but boasts a very high performance in noise reduction and when sandwiched between layers of acoustic plasterboard can help meet Part E of the Building Regulations for control of sound.  Although this product has a high sound insulation value, typical of other sound proofing mats, it will only improve the sound insulation of a structure when correctly installed.  It will significantly improve the sound insulation of any lightweight structure such as timber joisted ceilings and stud walls.

Click on the link to our Application Instructions at the bottom of this page for more information on how to install this innovative product.

PLEASE NOTE!! A ROLL OF THIS PRODUCT IS VERY HEAVY AND IT IS ADVISED THAT TWO PEOPLE SHOULD CARRY IT. THE ADHESIVE REQUIRED TO BOND THIS PRODUCT IS OUR SPECIAL SPRAY ADHESIVE AND IS A CONTACT ADHESIVE. ONCE THE PRODUCT IS GLUED IT CANNOT BE EASILY RE-POSITIONED OR REMOVED.

The SoundBlocker Membrane was tested in accordance with BSEN ISO 140.

 

APPLICATION INSTRUCTIONS

 

For more information

Click this link to contact us

 

soundproofing a wall and soundproofing a ceiling

 

Copyright 2011 Bicester Products Ltd.